How to Perform Ink Flush
Ink flush consumes a great amount of ink.
Frequent ink flush can rapidly consume ink, so perform ink flush only when necessary.
Important
-
Before performing ink flush, check the remaining ink level of all colors. If the remaining ink level is below the single dot (A), refill the ink tank of corresponding color.
-
When performing an ink flush, check the free space of the maintenance cartridge. Ink flush consumes a lot of ink, and the consumed ink is discharged to the maintenance cartridge. If the free space is low, replace it with a new maintenance cartridge. If the available capacity of the maintenance cartridge is low, a message is displayed and ink flush cannot be performed.
Perform ink flush following the procedure below.
-
Select (Setup) on HOME screen.
The setup menu screen appears.
Note
- If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.
-
Select (Maintenance).
-
Select Ink Flush.
-
Select All colors, Color or BK.
-
Check displayed message and select OK.
-
Check displayed message and select Yes.
-
Check displayed message and select Yes.
Ink flush starts.
Note
-
Do not perform any operations while ink flush is in progress. It takes approximately seven minutes to complete.